Mitsubishi Electric Programmable Controller MELSEC-iQ-F Analog Function FX3U-4AD-TC-ADP

Basic function

【The total number of input/output points】(Max. 384 points) directly wired on the programmable controller and remote I/O(Max. 256 points) on the network (CC-link) can be extended to 384 points.

【Connected expansion units/modules】I/O expansion devices can be connected to the FX2N series of I/O expansion units/modules. In addition, the FX0N/FX2N/FX3U series of special functional units/modules can be connected to up to 8 units. (FX0N series can only connect FX0N-3A)

【 Program memory 】Built-in 64K steps of RAM memory. In addition, program memory can be turned into flash memory by using memory card cartridges.

【Operation instructions] In addition to floating point numbers, string processing instructions, but also has a fixed coordinate instructions and other rich instructions.

【 Built-in RUN/STOP switch 】RUN/STOP operations can be performed through the built-in switch. In addition, RUN/STOP commands can be issued from generic input terminals or peripheral devices.

【Support write in RUN】Through the programming software used by the computer, you can change the program when the programmable controller runs. [Built-in clock function] Built-in clock function, you can perform time control.